Virtual monitoring in real time by drone or as an avatar in the jobsite.
Training on real equipment can create challenges for instructors. Whether crammed together with a trainee in the cab or shouting from the ground, instructors often miss out on providing operators with valuable feedback. This not only hampers the training process but can cause instructors to miss a chance to address trainees’ negative habits, ultimately slowing down the learning process.
Intellia Drone View provides unique vantage points for virtual training. Using a dedicated station linked to the simulator, Intellia Drone View allows the instructor to enter the trainee’s exercise to monitor their work in-real time and from three perspectives: flying by drone, as an avatar walking around the jobsite, or underground.
Instructors can observe trainee progress from various angles. They can zoom in with Drone Mode to closely examine how the trainee lifts a block from the back of the trailer, for example, or pan out for a comprehensive bird’s-eye view of the jobsite as the operator drives from the truck to the designated drop-off point. Toggle to Avatar Mode and the instructor’s viewpoint comes from a virtual character on the jobsite, allowing instructors to walk anywhere for a better vantage point. Intellia Drone View provides unparalleled perspectives, in an instant, so your operators never miss valuable instructor insights.
Intellia Drone View adds an exciting twist to the training experience and offers new insights with these innovative activities:
- Assess progress from vantage points that extend beyond the actual trainee’s viewpoint on the simulator;
- Lower the drone view to Subterranean, below ground level, to see grading volume in progress;
- Survey the entire project status and jobsite from a top-down perspective during exercises;
- Raise safety awareness by adding a level of immersiveness as a character on a jobsite.
With Avatar Mode, the instructor can actively participate in the exercise as an additional dynamic obstacle for the operator to avoid within the simulation. This perspective provides an additional level of realism, improves learning retention, and enhances operator critical thinking.
Intellia Drone View is a standalone training management solution and is compatible with the entire line of CM Labs hardware platforms. The instructor can toggle between Drone and Avatar Mode allowing for real-time viewing options. In Drone Mode, the experience mirrors that of controlling an actual drone, while in Avatar Mode, the instructor navigates the virtual jobsite as a 3D character.
Instructors can observe trainee progress from various angles. They can zoom in with Drone Mode to closely examine how the trainee lifts a block from the back of the trailer, for example, or pan out for a comprehensive bird’s-eye view of the jobsite as the operator drives from the truck to the designated drop-off point. Toggle to Avatar Mode and the instructor’s viewpoint comes from a virtual character on the jobsite, allowing instructors to walk anywhere for a better vantage point. Intellia Drone View provides unparalleled perspectives, in an instant, so your operators never miss valuable instructor insights.
Intellia Drone View adds an exciting twist to the training experience and offers new insights with these innovative activities:
- Assess progress from vantage points that extend beyond the actual trainee’s viewpoint on the simulator;
- Lower the drone view to Subterranean, below ground level, to see grading volume in progress;
- Survey the entire project status and jobsite from a top-down perspective during exercises;
- Raise safety awareness by adding a level of immersiveness as a character on a jobsite.
With Avatar Mode, the instructor can actively participate in the exercise as an additional dynamic obstacle for the operator to avoid within the simulation. This perspective provides an additional level of realism, improves learning retention, and enhances operator critical thinking.
Intellia Drone View is a standalone training management solution and is compatible with the entire line of CM Labs hardware platforms. The instructor can toggle between Drone and Avatar Mode allowing for real-time viewing options. In Drone Mode, the experience mirrors that of controlling an actual drone, while in Avatar Mode, the instructor navigates the virtual jobsite as a 3D character.
Vortex Edge Plus
Professional simulator training on the desktop
Vortex Edge Max
Motion platform in a compact transportable format
Vortex Advantage
Best-in-class training for work site efficiencies
Our Intellia Training Packs feature self-guided, progressive learning programs and best-in-class simulation for a full suite of heavy equipment. With comprehensive operator metrics and detailed reporting, they provide the most comprehensive simulation training available on the market.
SimGuide Service
Simplify integration of your simulator, with guidance for set up, start-up, and beyond.
Signal Person Station
Train as a team with the world’s only simulation-based signal person training solution.
Mobile Training Center
Training and assessment anywhere with CM Labs’ Mobile Training Center.